Settings > Sound Settings > Audio Multi-Output

Audio Multi-Output

Adjust this setting to output audio through the HDMI OUT connector, the DIGITAL OUT (OPTICAL) connector, and the AV MULTI OUT connector simultaneously.

On Enable the multi-output feature.
Off Disable the multi-output feature.

Hint

When the multi-output feature is enabled, the following conditions will occur:

  • Audio output to connectors that are not selected in (Settings) > (Sound Settings) > [Audio Output Settings] is downscaled to 2 channels.
  • If you select [HDMI] in (Settings) > (Sound Settings) > [Audio Output Settings], audio will be output from the HDMI OUT connector with the following restrictions:
  • - Audio in Linear PCM format can only be output up to 5.1 ch, 44.1/48 kHz.
  • - Even if [Audio Multi-Output] is set to [On] on a CECH-2000 series system, bitstream audio recorded in Dolby TrueHD, Dolby Digital Plus or DTS-HD® format cannot be output on the system.
  • If you select [Optical Digital] in (Settings) > (Sound Settings) > [Audio Output Settings], audio will be output from the DIGITAL OUT (OPTICAL) connector with the following restriction:
  • - Audio in Linear PCM format can only be output up to 44.1/48 kHz.

Settings > Sound Settings > Audio Multi-Output