Using remote play (via the Internet)

To use this feature, you may be required to update the system software of the PS3™ system and the PSP™ system.

Connect the PSP™ system to a PS3™ system in your home via the Internet from an access point (hotspot) of a public wireless LAN service. By placing the PS3™ system in remote play connection standby mode, you can use remote play when you are away from home or even when you are abroad.

Hints

To use remote play via the Internet, you must have a PLAYSTATION®Network account.
You may not be able to use remote play via the Internet in some network environments.
For details, see the (Network) > (Remote Play) > [Using remote play (via the Internet)] section of the PS3™ system user's guide.
The usage method and charges associated with using a public wireless LAN service vary depending on the service provider. For details, contact the service provider.

Getting ready (1) (PSP™ system and PS3™ system)

To use remote play for the first time, you must register (pair) the PSP™ system with the PS3™ system.

1.	Connect the PSP™ system to the PS3™ system using a USB cable.
2.	From the PSP™ system's home menu, select (USB Connection) under (Settings).
3.	From the PS3™ system's home menu, select (Remote Play Settings) under (Settings).
4.	Select [Register Device].
5.	Confirm that a USB connection has been established between the PSP™ system and the PS3™ system, and then select [OK]. Follow the on-screen instructions to complete the registration (pairing).

Hints

The USB cable for the wireless controller can be used to connect the PSP™ system to the PS3™ system.
If you register a PSP™ system that had been registered with another PS3™ system, the registration with the first PS3™ system will be cleared.

Getting ready (2) (PS3™ system)

To set the PS3™ system to enter standby mode from the state where the system is turned off, you must perform the following steps on the PS3™ system. For details, refer to (Settings) > (Remote Play Settings) > [Remote Start] in the user's guide for the PS3™ system.

Steps that need to be performed on the PS3™ system

Complete the network settings on the PS3™ system so that it can connect to the Internet.
Create a PLAYSTATION®Network account.
Set to sign in automatically to PLAYSTATION®Network.
Set to log in automatically under (Users).
Set (Settings) > (Remote Play Settings) > [Remote Start] to [On].

Getting ready (3) (PSP™ system)

Create a network connection for connecting the PSP™ system to an access point. If the PSP™ system already has a saved network connection for use in connecting to a network via an access point, you do not have to create a new network connection to use remote play. For more information on connecting via an access point, refer to (Settings) > (Network Settings) > [Infrastructure Mode].

Using remote play

1.	Select (Remote Play) under (Network) in the PSP™ system's home menu.
2.	Select [Connect via Internet] for the method of connecting to the PS3™ system.
3.	Select the connection for the access point to be used for remote play from the list of connections.
4.	Enter the sign-in ID and password for the PLAYSTATION®Network account that is being used on the PS3™ system. The PS3™ system screen will be displayed on the PSP™ system when the systems are successfully connected.

Quitting remote play

Press the HOME button on the PSP™ system, and then select [Quit and Turn Off the PS3™ System] from [Quit Remote Play].

Hint

If the PS3™ system is performing a function such as copying or downloading a file and you do not want to turn it off, you can instead select [Quit Without Turning Off the PS3™ System].