Settings > Remote Play Settings > Custom Connection Settings
Custom Connection Settings
This setting is available only on PS3™ systems that are equipped with the wireless LAN feature.
If a PSP™ system is registered with a PS3™ system that is equipped with the wireless LAN feature, a network connection for remote play with a specific SSID and encryption key (WPA key) is automatically created for both systems, and the systems will be able to communicate with each other in infrastructure mode. If you select [Custom Connection Settings], you can manually change the SSID and encryption key that are set on the PS3™ system. It is usually not necessary to adjust these settings.
| SSID | Set the SSID. You can enter any SSID that you like. |
|---|---|
| WLAN Security Setting | Set the security method. You can only select [WPA-PSK (AES)] for remote play settings. |
| WPA Key | Set an encryption key. You can enter any key that you like. The encryption key is displayed as a series of asterisks. You will need the key that you set here if you change the network connection for the PSP™ system. Make note of the key for future reference. |
Hint
If the SSID and WPA key are changed for the PS3™ system, the SSID and WPA key must also be changed to the same values for the network connection of the PSP™ system. Be sure to register the PSP™ system again after changing these values.
