Manage Bluetooth® Devices 
You can register, or pair, Bluetooth®-compatible devices with your PSP™ system. You can also manage the Bluetooth® devices that are connected to your system.
Registering a Bluetooth® device
1. |
Prepare the Bluetooth® device.
|
2. |
Select (Settings) > (Bluetooth® Device Settings).
|
3. |
Select [Manage Bluetooth® Devices].
|
4. |
If the message [There are no Bluetooth® devices registered. Do you want to register a device?] is displayed, select [Yes].
If you already have registered devices, a list of the devices will be displayed. Select [Register New Device] on that screen.

|
5. |
Select [Scan for Bluetooth® Devices].
A list of Bluetooth® devices within range of the system is displayed.
|
6. |
Select the device that you want to register with your PSP™ system.
Follow the on-screen instructions to complete the operation. If required, enter your Bluetooth® device’s pass key. For details about the pass key for your Bluetooth® device, refer to the instructions supplied with the device.
|
Registering a PS3™ system controller
You can use a controller for the PS3™ system to operate the PSP™ system.
1. |
Prepare the following items:
- A controller for the PS3™ system
- A PS3™ system
- Two USB cables (the USB cable that is included in the PSP™go system package, and the USB cable that is included in the PS3™ system package)
|
2. |
Select (Settings) > (Bluetooth® Device Settings).
|
3. |
Select [Manage Bluetooth® Devices].
|
4. |
When the message [There are no Bluetooth® devices registered. Do you want to register a device?] is displayed, select [Yes].
If you already have registered devices, a list of the devices will be displayed. Select [Register New Device] on that screen.

|
5. |
Select [Register a PS3™ System Controller].
Follow the on-screen instructions to complete the operation.
|
Hints
- You can register up to eight Bluetooth® devices with one PSP™ system. If you cannot register a device because you have reached the maximum number of devices, try deleting a registered device.
- For details about a Bluetooth® device, refer to the instructions supplied with the device.
- A "pass key" is a type of hardware ID used to register a Bluetooth® device. It may also be referred to as "pass code", "PIN code", "PIN number", "password" or "authorization code".
Managing Bluetooth® devices
You can check information about the Bluetooth® devices that are connected to your PSP™ system, or connect and disconnect devices. After selecting the device that you want to manage, press the
button, and then select an option from the menu that is displayed.
Connect |
Connect a device. |
Disconnect |
Disconnect a connected device. |
Set |
Change device settings. |
Delete |
Delete a registered device. |
Information |
Display information for a connected device. |