Settings > Remote Play Settings > Remote Start
Remote Start
You can remotely turn on a PS3™ system that is in standby mode (Wake On LAN) using a device that supports remote play, such as a PS Vita system or PSP™ system. Before using this feature, you must first perform the following steps:
When using remote play via the wireless LAN feature of the PS3™ system or via an access point:
- If you are using a PSP™ system for remote play, update the PSP™ system software to version 3.72 or later.
- Set to log in automatically under
(Users) on the PS3™ system.
When using remote play via the Internet:
- If you are using a PSP™ system for remote play, update the PSP™ system and the PS3™ system to the latest version of the system software.
- Set to log in automatically under
(Users) on the PS3™ system.
- Complete the network settings on the PS3™ system so that it can connect to the Internet.
- Create a Sony Entertainment Network account.
- Set to sign in automatically to PSNSM.
Hints
- To use the remote start feature, users of CECH-4302, CECH-4303, CECH-4304, and CECH-4308 series PS3™ systems must be connected to a network using the wireless LAN feature of the PS3™ system.
- For details on logging in automatically under
(Users), see
(Users) > [Logging in] > [Setting automatic login] in this guide.
- For details on signing in automatically to PSNSM, see
(PlayStation™Network) > [Save Password (Auto Sign-In)] in this guide.
Enabling remote start
1. |
Select |
---|---|
2. |
Select [Remote Start] > [On]. |
3. |
Select [OK] on the screen that is displayed. To use remote play via the Internet, select [Enable Remote Start via the Internet]. |
4. |
Turn off the PS3™ system. |
5. |
Play remotely using a device that supports remote play, such as a PS Vita system or PSP™ system. |
Hints
- For details on remote play using a PS Vita system or PSP™ system, see
(Network) >
(Remote Play) > [Using remote play] in this guide.
- If remote start is enabled, the internal fan of the PS3™ system will continue to operate even after the system is turned off.
Disabling remote start
1. |
Select |
---|---|
2. |
Select [Remote Start] > [Off]. |
Remote start via the Internet
You may not be able to use remote play via the Internet depending on the network device in use. If this happens, check the following information:
Notice
Depending on the type of router, the PS3™ system may be started unintentionally if remote start is enabled. If a remote play connection is not established within a certain amount of time after the PS3™ system is started, the system will turn off automatically. To prevent this from happening, remote start via the Internet may be disabled automatically.
- A router is required to use remote start via the Internet.
- If the router supports UPnP, enable the router's UPnP function.
- If the router does not support UPnP, you must set the router's port forwarding feature to allow communication with the PS3™ system from the Internet. The port number that is used for remote play and remote start is TCP: 9293 or UDP: 9293. For information about setting this option, refer to the instructions supplied with the router.
- Port forwarding is a function for forwarding signals that arrive at a specific port (entrance) to another specified port (exit). This is also referred to as "port mapping" or "address conversion."
- If the router's IP address (global IP address) is changed when the PS3™ system is in standby mode, remote start will not be successful.