Testing the connection
You can test the Internet connection and see details about the connection. Results are displayed for the following items:
| Connection Name |
Displays the name of the Internet connection that is currently being used |
| Signal Strength |
Displays the signal strength of the access point |
| SSID |
Displays the SSID of the access point |
| BSSID |
Displays the BSSID of the access point |
| Channel |
Displays the wireless channel used by the access point |
| Security |
Displays the type of encryption key used by the access point |
| Authentication |
This item is displayed only on PSP™ systems sold in Korea.
"EAP-MD5" is displayed when authentication information for a public wireless LAN service has been set. Otherwise, "None" is displayed. |
| IP Address |
Displays address information for the network |
| Subnet Mask |
| Default Router |
| Primary DNS |
| Secondary DNS |
| MAC Address |
Displays the MAC address of the PSP™ system |
| Proxy Server |
Displays information about settings for the proxy server |
| Internet Browser |
Displays whether the PSP™ system is set to automatically start the Internet browser when connected to the Internet |
| Internet Connection |
Displays whether the connection to the Internet was successful |
Hint
If an Internet connection cannot be established, follow the on-screen instructions to check the network settings. You can adjust network settings under 
(Settings) > 
(Network Settings) > [Infrastructure Mode] > [Options]. For details on the required settings, refer to the information provided by your Internet service provider or the instructions supplied with the network device.
Settings